Usb Tap Driver Freescale

Hi,

In our data base I found answers provided by a colleague for similar issue.

Please have a look below.

Hope this will help you.

Regards

Pascal

1st:

There s a physical hardware serial port 6-pin RJ-25 socket which is used for target serial connections. That port is unrelated to CWTAP configuration.  That port does not use any drivers.

There s also a virtual serial port in the USB connection which shows up as CDC Serial in Windows.  This is what we are talking about. That one does have a driver file in CCS and should work just fine on Windows XP SP3.   The driver file is ccs/drivers/usb/x32/cwtap-usb-serial.inf.  It should get installed automatically by setup.bat, but you can also manually browse to it with the driver wizard if you prefer.  Once it is installed, you should see a COM port assigned to the cwtap in device manager, and you can access it with Hyperterminal or another serial program.

Note that there s a known issue with the virtual serial port – you need to close it before you reset the cwtap.  If you leave it open in Hyperterminal and reboot or power-cycle the cwtap, subsequent attempts to connect to the cwtap will fail.  You have to close Hyperterminal and reset the cwtap again to get it working.  This appears to be an issue with the Microsoft drivers and we have not been able to find a workaround.

2nd:

Question:

After installing codewarrior pa v10.3 as suggested, the usb and Ethernet ports of the codewarrior tap have successfully installed drivers.  There is a CDC serial device that did not install the drivers correctly.  I installed an evaluation version of 10.3 on a windows 7 machine and noticed the CDC serial installed a driver whereas XP did not.

Should Codewarrior PA v10.3 support the serial device on XP indicating a problem with my installation.

Or is the serial port on XP not supported.

Or is another driver needed.

Answer:

CDC serial driver is provided by Windows 7 OS, for Windows XP system, you need to download and install CDC serial driver from Website by yourself.

  CDC serial is used to open an console to configure CodeWarrior TAP itself for Ethernet connection, so if you only use CodeWarrior TAP USB connection, no need to install the CDC serial driver.

The CodeWarrior TAP enables target system debugging via a standard debug port usually JTAG while connected to a developer s workstation via Ethernet or USB.

The CodeWarrior USB TAP host target interface is a feature-packed, no nonsense run-control tool that allows developers to save precious development time during target.

CodeWarrior USB TAP last downloaded: 8.1.2016 - 2016 version. 22 Users. Download Rating: 98. Drivers for windows xp: CodeWarrior USB TAP - windows driver, Driver.

Driver Scape

codewarrior tap driver

usb tap driver freescale
  • Windows 7: Using USB TAP on a Classic CodeWarrior installation, Rev. 1.0 6 Freescale Semiconductor Figure 5. The CodeWarrior USB driver, as recognized by.
  • Use the links on this page to download the latest version of CodeWarrior USB TAP drivers. All drivers available for download have been scanned by antivirus program.
  • Driver Genius will automatically scan and find the official CodeWarrior USB TAP driver matching your needs - no matter what windows version you re using.
  • USB TAP Users Guide 5 1 Introducing the CodeWarrior USB TAP Emulator The CodeWarrior USB TAP emulator is a cost-effective tool that helps you develop and.

Home nbsp nbsp nbsp nbspCodeWarrior USB TAP

Use the links on this page to download the latest version of CodeWarrior USB TAP drivers. All drivers available for download have been scanned by antivirus program. Please choose the relevant version according to your computer s operating system and click the download button.

CodeWarrior USB TAP Drivers Download.